New 2MegaPixel GigE CCD cameras - JAI TM-2040GE
New
2MegaPixel GigE CCD cameras -
JAI TM-2040GE
JAI's popular and proven range of CCD cameras has a new addition to its
GigE series. The TM-2040GE takes the high fidelity front-end circuitry,
low noise power supply and high resolution 1" progressive scan IT
CCD sensor (KAI-2020) and fits these to the cost savings and flexibility
of the new GigE vision serial interface standard.
The new TM-2040GE GigE CCD cameras offer two-megapixels (1600 x 1200)
and software selectable operation that allows users to use both single
or dual tap modes that produce 17 or 34 frames per second output respectively.
The GigE TM-2040GE CCD cameras produce high resolution 12-bit linear
images, or 10-bit/8-bit images that are modifiable by a user-defined look-up
table (LUT) for use in difficult lighting situations. It also offers all
the standard benefits of the GigE vision serial interface; including up
to 100m cable lengths, data rates that are up to 100 MBps and the cost
savings/flexibility arising from the use of standard Cat 5E or Cat 6 cabling.
Other features of these high resolution GigE CCD cameras include image
center partial scanning (600, 300, or 150 lines), as well as variable
partial scanning that provides users with the option of choosing the starting
point and the number of lines to be scanned. The lower the number of lines
selected the higher the frame rate output. It also offers a defective
pixel compensation feature that uses neighboring pixels to adjust for
out-of-tolerance pixels.
The TM-2040GE CCD cameras are offered in both monochrome and Bayer CFA
colour. The monochrome model enables binning modes which add pixels in
horizontal, vertical or both directions for increased sensitivity. With
full frame shuttering of up to 1/32,000 secs, asynchronous reset and no-delay
pulse width control shuttering, these high resolution CCD cameras can
be applied to many applications where very precise triggering, high resolution
and speed are required.
Another high performance feature of the TM-2040GE GigE CCD camera is
its PIV (Particle Image Velocimetry) mode enabling the very fast capture
of pairs of images separated by only a few microseconds for particle motion
analysis.
The new TM-2040GE GigE CCD cameras can be widely used in demanding machine
vision applications across a diverse range of industries including manufacturing,
medical, defence and intelligent transportation.
The standard TM-2040GE GigE CCD cameras have a C-mount lens adapter but
are also available with an optional F-mount or M42 mount (P-mount) for
use with large format lenses which will reduce vignetting.
Summary of key product features:
- Square pixels for accurate measures
- 12-bit A/D for high image fidelity
- 10-bit/8-bit output modifiable by a built-in look-up table for improved
handling of high contrast lighting situations.
- Binning and partial scan modes for higher-speed operation, including
user-definable partial scanning allowing users to define any starting
point and any number of scan lines.
- Pixel compensation technology using neighboring pixels to correct
for defective ones, thereby maintaining a cleaner image over a longer
camera lifetime.
- Automatic channel balancing, providing high-speed dual-tap output
with maximum image quality
- A built-in PIV mode able to capture pairs of images a few microseconds
apart for advanced studies of movement in fluids or gases.
Machine vision integrators and machine vision users worldwide now have
access to a greater range of industrial cameras with JAI's TM-2040 GigE
range; that combine high resolution features with the ease-of-use GigE
Vision standard interface to deliver a yet once again winning CCD camera.
For more information or to purchase please contact Adept Electronic Solutions
at www.adept.net.au Tel Sydney (02) 99792599 Perth (08) 92425411
For more information please contact
us.
|